Archive for January 30, 2012

How to Shop for the Best Day Trading Computer

A day trader computer system shouldn’t be anything less than superior. If you’re still using a PC that lacks essential components, then you won’t be able to become a superior day trader. To be the best, you must have the best. Shopping around for the best trading computers isn’t hard, as long as you know what it is you’re looking for. To start, you should be looking for easy trading computers, which means a set-up that isn’t difficult to operate. Most day traders aren’t technical and don’t want to have to learn all of the technical details of a day trader computer system.

Find a Company with the Best-in-Class Support

Once you have purchased a day trader computer system, it’s important that it come with great technical support. Otherwise, the systems that should be easy trading computers become difficult PCs. Since a lot of day traders aren’t “geeks”, they don’t want to have to worry about troubleshooting their machines when something goes wrong. By purchasing your trading system from a company that has awesome support, you won’t have to worry about this. There should be a go-to person that you can call on for at least three to five years after you have purchased your PC – anything less than this is low-end support.

What to Look for in Processors and RAM

As mentioned, your trading PC should have top notch components that will keep your machine running flawlessly. Two essential components that determine the quality of your computer are the processor and RAM. The processors that you want to go with should be one of three – the i7-2600K, i7-990X or i7-950. The best of the three is the i7-990X because it is fast and powerful, but it is also the most expensive. To get the best bang for your buck, you should opt for the i7-2600K. Then for the memory RAM, which enables you to have multiple applications and programs running seamlessly once, you will need to have at least 3 GB worth. However, it is recommended that you go for between 6 GB and 16 GB for ultimate performance.

Why You Should Get Solid State Hard Drives

There are two types of hard drives that you can purchase – solid state hard drives and traditional hard disk drives. As technology proves to evolve over time, so should you. And the way to do so in this case is to go with the solid state hard drives, also known as SSD. There are a couple of things that make these better.

Hardware

How to Refill Ink Cartridges

The majority of inkjet printers use ink cartridges that are able to be repeatedly used. As the cost of ink can be high, refilling your cartridges can save you a considerable amount of money.

You can purchase inkjet refill kits from an office supplies shop in your locality. The kits typically comprise ink, syringes and an instruction booklet. The colour refill kits from your printer will feature yellow, blue and red ink, each contained within separate bottles.

You will need to remove the cartridge from your printer before you begin to refill them. Your printer is likely to house a black cartridge and a colour cartridge. Ensure that you remove the correct cartridge. You will find holes for the ink under a label on the top of the cartridge. Pull off this label to access these holes.

Place the ink cartridge onto a non-porous surface that has been covered with a protective sheet and pull on some latex gloves to prevent your hands from becoming covered in the ink. If you are worried about spoiling your clothing, you may wish to wear old clothes during the refilling process. The process of refilling your cartridges can be messy; ink has the ability to smear everywhere and can stain your carpets and flooring so it is essential that you are careful. Ensure that you are armed with wet paper towels to help you to mop up any ink spills with ease.

The holes on the top of your ink cartridge will relate to a specific colour. Match the colours up to the bottles found in your refill kit. Concentrating on one colour at a time, insert the correct ink into the hole on the cartridge using the syringe. It is essential that you refill your ink cartridge slowly otherwise you will risk spilling the ink. As the ink may take time to be absorbed into the ink cartridge, ensure that you provide yourself with enough time to complete the task undisturbed. If you are refilling your cartridge while small children and animals are in the house, ensure that you do not provide them with access to the ink cartridge or the refill kit.

Once you have refilled all of the colours, place the label back over the refill holes. Ensure that the label adheres to the cartridge securely. If it fails to do so, use a piece of sticky tape to keep the label in place. The refill holes must be covered up to prevent the ink from evaporating. Once you have covered the holes, insert your cartridge into the printer and follow the instructions provided by your printer’s manufacturer.

Ink cartridges can often be repeatedly refilled. However, some manufacturers equip their cartridges with a chip that prevents you from refilling the cartridges yourself. Others fit a chip within the printer to prevent the printer from accepting refilled cartridges. In the event that your printer is unable to accept refilled cartridges, you may have to purchase brand new cartridges and, when purchasing your next printer, should take the time to ensure that its cartridges are able to be refilled.

Hardware

How Businesses Can Save a Few Hundred Dollars By Knowing When and Where to Order Modules

You might discover several online companies selling great SFP transceivers for your business needs, but many have huge markups on their product lines that leave little room for any savings. Other companies, though, normally try to liquidate their product lines as soon as newer devices arrive to help individuals save some money. No matter if you purchase these items on discount or not, you can expect to pay a couple hundred dollars for a transceiver because of the hardware these items come with as well as the manufacturing cost of them.

When To Shop

The moment most people start to look for an SFP transceiver is when one of them breaks down and fails to keep sending the information as it once did. Most folks think this is the ideal time to wait to buy a new device, but it’s often the worst time to get modules, and instead, you should order a device sooner rather than later in order to help cut down on the costs. Instead, you want to wait till the item is displaying signs of wear and tear to order because then you’ll have lots of time to search through different company catalogs for specials and save a few bucks in the process. Say you need to purchase a new Cisco GLC-T transceiver before your old one breaks; you might not have the luxury of shopping around for a new item and may have to get the product at whatever price vendors sell it at. Waiting till the last minute affords you very little leeway to wait for discounts or purchase from a cheaper merchant with larger discounts and better product lines.

What to Look For

You want to avoid purchasing from the OEM, and instead look for alternative devices that can do the work you need without the greater cost of the original manufacturer’s devices. You could always buy products from companies that are beginning to liquidate their two-year or three-year device lineups to make room for the new transceivers that will be arriving. While buying two or three-year old products is a wonderful way to save a hefty amount of cash, it does entail a big disadvantage when getting Cisco SFP transceivers because of the old features you may no longer need. If you want to save money, it is far better to order items from a third-party dealer than from the actual manufacturer, which normally charges higher fees.

Hardware
Page 1 of 212